we have a site of 26 Aruba's AP, some 205 model and some 225 model In this site, we have only 1 of the AP's that is having a problem, and computers can not see the DHCP and get APIPA, but not always. we restart the AP and it will be good, some times for a day or two up to a week.
Last time this occured we had 25 connections, 12 had a correct IP address scheme, and the other 13 had an APIPA IP.
Lease wise the DHCP is fine, we have 3 SSID's broadcast, 2 of them with a /21 and the third a /22, and only have a total 250ish connections. and double checked the DHCP, none of the scopes are even close to be out of IP's.
We have replaced the AP and still have problems.
We are going to upgrade the firmware this Tuesday but having a problem understanding why nly ONE AP is having a problem. and none of the other 25.
Any thoughts as to why this might occur?
#AP225