I was given a RAP that I have been tasked with trying to get it connected to our controller. For some reason I am having great difficulty, and an extra set of eyes would be more than helpful at this point.
I am given a "RC_ERROR_IKEP2_PKT1" error when attempting to connect to the controller from our internal network (just to try to get things working first).. After asking google, I found that the RAP may not be connecting to the controller, and followed instructions I found elsewhere to troubleshoot. My output is as follows:
(Aruba) #show datapath session table | include 4500
X.X.X.X X.X.X.X 17 4500 4500 0/0 0 0 0 1/1 1c 1 1 F
X.X.X.X X.X.X.X 17 4500 4500 0/0 0 0 0 1/1 1c 0 0 FC
I followed the AP wizard, and set my configuration to AP specific for this AP.
The RAP is whitelisted (tried with and without an IP assigned)
Under VPN Services I have L2TP & XAuth enabled. Authentication Protocals is PAP only. DNS info is listed, address pool is setup. Nat-T is enabled.
Any guidance would be appreciated!