Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Historical goodput values and 40Mhz Intolerrance

This thread has been viewed 1 times

  • 1.  Historical goodput values and 40Mhz Intolerrance

    Posted Feb 20, 2014 08:17 AM

    Hi All

     

    Hope I am posting this in the correct board.

    I have 2 Questions

     

    1.)  Is there anyway to get a historical view of goodput (as seen on the dashboard) -- clicking it and looking at the trend I only see at most history for the past hour. Is there another way to see goodput values from lets say 2 days ago?

     

    2.) What does 40Mhz Intollerance do and why would I want to enable it or leave disabled on my High-Through-Put radio?

     

    Thanks in advance



  • 2.  RE: Historical goodput values and 40Mhz Intolerrance
    Best Answer

    EMPLOYEE
    Posted Feb 20, 2014 09:41 AM

    1.  The controller does not have much historical information, so two hours is probably the most you will see.

     

    2.  For an explanation, please search for intolerance here:  http://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Web_Help_Index.htm#ArubaFrameStyles/AP_Config/RF_Management.htm