Wireless Access

Reply
New Contributor

How do I set up dhcp option 43 on windows server 2016?

Hi,

 

I want to pass the IP address of the master controller through dhcp option 43 on the windows server.

Windows server's dhcp option 43 setting can only input hex value and ascii value.

Can I convert the master controller's IP to a Hex value and enter it?

 

ex) 192.168.1.101 -> c0 a8 01 65 ?

 

Re: How do I set up dhcp option 43 on windows server 2016?

Below may help you:

https://www.arubanetworks.com/techdocs/ArubaOS_60/UserGuide/DHCP_Option_43.php

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Aruba Employee

Re: How do I set up dhcp option 43 on windows server 2016?

It's worth noting that as of Server 2019, this document is no longer valid - Microsoft has gone and changed how they do this, and the ability to add custom/vendor-specific options in DHCP as described is nowhere to be found. 

Ian Beyer
Aruba Employee

Re: How do I set up dhcp option 43 on windows server 2016?

It's worth noting that as of Server 2019, this document is no longer valid - Microsoft has gone and changed how they do this, and the ability to add custom/vendor-specific options in DHCP as described is nowhere to be found. 

Ian Beyer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: