Wireless Access

Reply
Occasional Contributor II

How do you factory default an AP from the controller?

How do you factory default an AP from the controller?

Can this be done from CLI on the controller?

 

Thanks

David

Guru Elite

Re: How do you factory default an AP from the controller?

You can't truly reset it from the controller. Have to console in to the AP

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

Re: How do you factory default an AP from the controller?

Cappalli is correcto the best to do this is to either do it from Console or move the ap to the default ap group
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: How do you factory default an AP from the controller?

At one stage it was possible with the apflash command, but that was removed a few versions ago.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: