Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to Set the name replace IP

This thread has been viewed 0 times

  • 1.  How to Set the name replace IP

    Posted Jan 30, 2012 01:29 AM

    Aruba conroller 620 , OS version 6.1.2.7

     

    Can I add  a name replace IP or Mac Address??



  • 2.  RE: How to Set the name replace IP

    EMPLOYEE
    Posted Jan 30, 2012 05:48 AM
    Oh_hab,

    Do you mean in the user table? The only way you can do that is if you authenticate against active directory or ldap


  • 3.  RE: How to Set the name replace IP

    Posted Jan 30, 2012 10:37 AM

    Unless your speaking of provisioning an AP?

     

    That's under the configuration section, then AP Installation.

     

    You should be able to change the Name of the AP, and assign it a static IP if you want.



  • 4.  RE: How to Set the name replace IP

    Posted Jan 30, 2012 12:11 PM

    You can use netdestination to map names to an IP addres 

     

    (Aruba651) (config) #netdestination ?
    STRING Name of destination host or subnet

    (Aruba651) (config) #netdestination server
    (Aruba651) (config-dest) #host 1.1.1.1

    (Aruba651) (config-dest) #exit

    (Aruba651) (config) #show netdestination server

    server
    ------
    Position Type IP addr Mask-Len/Range
    -------- ---- ------- --------------
    1 host 1.1.1.1 32

     

    You can use this name in an ACL instead of the IP address 

     

    For example: 

    user alias "server" any permit