Wireless Access

Reply
Highlighted
Frequent Contributor I

How to check the AP has built the tunnel to the Cluster controllers IN CLI

Hi Friends,

 

How to check the AP has built the active and standby tunnel to the cluster controller using CLI command.

Issue here is, I am seeing heartbeat miss between the controller and AP, the AP is rebootstraping.

But the connectivity packet size allowed between AP and controller is 1250 mtu with all the APs but we have the issue with two perticular APs.

 

Regards,

Mallikarjun

 

 

 

 

 

 

 

 

Highlighted
Guru Elite

Re: How to check the AP has built the tunnel to the Cluster controllers IN CLI

"show ap database" will let you know if a primary and secondary tunnel is built, but it will not be updated dynamically when there are heartbeat misses.

 

What is the difference between those two APS and the others?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Frequent Contributor I

Re: How to check the AP has built the tunnel to the Cluster controllers IN CLI

Thank you
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: