Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to check the AP has built the tunnel to the Cluster controllers IN CLI

This thread has been viewed 14 times

  • 1.  How to check the AP has built the tunnel to the Cluster controllers IN CLI

    Posted Jan 30, 2020 06:04 AM

    Hi Friends,

     

    How to check the AP has built the active and standby tunnel to the cluster controller using CLI command.

    Issue here is, I am seeing heartbeat miss between the controller and AP, the AP is rebootstraping.

    But the connectivity packet size allowed between AP and controller is 1250 mtu with all the APs but we have the issue with two perticular APs.

     

    Regards,

    Mallikarjun

     

     

     

     

     

     

     

     



  • 2.  RE: How to check the AP has built the tunnel to the Cluster controllers IN CLI

    EMPLOYEE
    Posted Jan 30, 2020 06:12 AM

    "show ap database" will let you know if a primary and secondary tunnel is built, but it will not be updated dynamically when there are heartbeat misses.

     

    What is the difference between those two APS and the others?



  • 3.  RE: How to check the AP has built the tunnel to the Cluster controllers IN CLI

    Posted Feb 04, 2020 09:40 AM
    Thank you