Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to make APs move off Master and Onto Local?

This thread has been viewed 0 times

  • 1.  How to make APs move off Master and Onto Local?

    Posted Nov 23, 2016 03:01 PM

    New local controller. I have the LMS set in the AP System profile (I think that's what it's called) I know it works because I have a test AP in my office that worked after I unplug/replug.

    Is there a way in the controller to force APs to move? I tried rebooting them from the provisioning menu and that didn't make them move.



  • 2.  RE: How to make APs move off Master and Onto Local?
    Best Answer

    EMPLOYEE
    Posted Nov 23, 2016 03:12 PM
    Change the lms-ip to that new controller and it will change immediately


  • 3.  RE: How to make APs move off Master and Onto Local?

    Posted Nov 23, 2016 03:18 PM

    Oh jeeze. So I did this. I never hit apply. So when I went back to double check, found out it wasn't saved in the AP Group.

    Clearly it's a slow day before a holiday.

    Thanks



  • 4.  RE: How to make APs move off Master and Onto Local?

    Posted Nov 25, 2016 12:20 PM
    Primary LMS is the one which decides in which controller the AP should come up. Jus change it respectively..


    #AirheadsMobile