Wireless Access

Reply
Highlighted
Contributor I

Re: How to move a mobility controller from one Mobility Master to a new Mobility Master

I had to wipe the controller clean by physically connecting to it with the console cable and running the command 'write erase all' which factory defaults it. I then went through the wizard in the CLI and joined it to the stage environment mobility masters. 

 

 

 

View solution in original post

Highlighted
MVP Expert

Re: How to move a mobility controller from one Mobility Master to a new Mobility Master

OK, thanks., I will do the same then. It seems there is no other way

 

Regards,

Julián

Highlighted
Super Contributor II

Re: How to move a mobility controller from one Mobility Master to a new Mobility Master

Glad to hear it worked out OK.

 

 

 

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX #509 | ACCX #1272 | ACSA | ACDA | ACEA | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: