Someone told me that LED-signs of APs could be turned off (to keep users calm not having a blinking device above their heads). How can i do this?
We have 105 and 135 APs and a 3200 Controller.
(host) #configure terminal ap system-profile default led-mode off(host) #configure terminal ap system-profile default led-mode normal
That worked!
I also found the representation in the Web-GUI.
Can we really turn off LIghts on AP 105 with OmniVista 3600 controller. Also can it be VIA gui ?? or have to console in AP and then do it ?
You can do it via the GUI in the AP system profile. No need to console.
Thanks a lot. :)
Can this be done on a per AP basis though? i have an AP installed in a darkroom that is messing up some film processing. I want to diable the LED's on that particular AP but not the rest of the other AP's using the same profile.
Thanks,
Yes, you can do it on a per-AP basis under AP Specific.
Sweet. Thanks!
Tim, is there a way to do this through the GUI for IAPs?
In the system --> General tab, click on 'show advanced options'.
Thanks, Michael - appreciate the help; however, what I'm wondering is whether this can be done on only specific APs rather than the entire cluster. Is that possible?
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.