Wireless Access

Someone told me that LED-signs of APs could be turned off (to keep users calm not having a blinking device above their heads). How can i do this?

We have 105 and 135 APs and a 3200 Controller.

(host) #configure terminal ap system-profile default led-mode off
(host) #configure terminal ap system-profile default led-mode normal

That worked!

I also found the representation in the Web-GUI.

Can we really turn off LIghts on AP 105 with OmniVista 3600 controller. Also can it be VIA gui ?? or have to console in AP and then do it ?

You can do it via the GUI in the AP system profile.  No need to console.

Thanks a lot. :)

Can this be done on a per AP basis though?   i have an AP installed in a darkroom that is messing up some film processing. I want to diable the LED's on that particular AP but not the rest of the other AP's using the same profile.

Thanks,

Yes, you can do it on a per-AP basis under AP Specific.

Sweet.  Thanks!  

Tim, is there a way to do this through the GUI for IAPs?

In the system --> General tab, click on 'show advanced options'.

Thanks, Michael - appreciate the help; however, what I'm wondering is whether this can be done on only specific APs rather than the entire cluster. Is that possible?