Wireless Access

Reply
Occasional Contributor II

IAP 103: Log Message: fail-prov-no-rule

I have IAP 103's running code verision ArubaInstant_Pegasus_6.5.4.2_61807 . I'm getting the message "set amp discover allowed: code: fail-prov-no-rule" in the logs. What does this mean and is it a problem or issue?

 

Thanks

 

GW

Occasional Contributor II

Re: IAP 103: Log Message: fail-prov-no-rule

AMP is the acronym for Airwave Management Platform. I would guess it has something to do with that. Do you have it connected to an Airwave server? 

 

If so, are you running IGC (Instant Group Config) or monitor only mode?

Occasional Contributor II

Re: IAP 103: Log Message: fail-prov-no-rule

We do not have an Airwave server. We just have three IAP 103's with one as the master.

 

GW

Guru Elite

Re: IAP 103: Log Message: fail-prov-no-rule

That fail-prov-no-rule means that there are no rules for that device in Aruba Activate, Aruba's cloud solution.  The message is benign and can be ignored.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: