Wireless Access

Trusted Contributor I

Re: IAP 105 Authentication (Captive Portal & 802.1x)

@jordontin wrote:

Hi kdisc98,


Below is the error message from the NPS server:


A Radius messages was received from the invalid radius client IP address" ip address is the physical Aruba IAP 105 ip address. VC ip address is


On the NPS server i already put as a RADIUS client.


Please advise.

that is your problem, you can configure as the radius client but if the request comes from it wont work. so either add as radius client or configure your IAP to use the VC address, that should be setting: "Dynamic RADIUS Proxy" at advanced settings.

Search Airheads
Showing results for 
Search instead for 
Did you mean: