Wireless Access

Reply
New Contributor

IAP-105 User name/Password

Hello,

     I just set up a Aruba Instant  IAP-105.  It followed the Aruba Instant Quick Start Guide.  Going thru the intial setup, it allowed me to create a new network.  At that time I went back into the configuration and changed the username and password from the default to a common one we use with our network switches etc.  I was able to log in with it several time yesterday.

 

     Today I am trying to log in and I can't get by the username and password.

 

      Is there any way to get by it to get into the configuration or do I need to reset back to factory defaults?

 

       I saw the reset procedures at one time but don't now.   I know you have to depress the reset button and wait until ....... before releasing.

 

Thankyou.

Guru Elite

Re: IAP-105 User name/Password

Try unplugging the AP, then holding the reset button as you power it back up for about 10 seconds.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: