Wireless Access

New Contributor

[IAP-205H] Can't get IP Address via E0/PT port

     I have an issue about E0/PT port on Aruba IAP-205H. When I connect a lan cable from my router to E0/PT port, I can't get an IP Address.

     But When I connect to E0 Port on the rear side, It's working fine.

     I need to use E0/PT port on the bottom because my mounting kit is AP-205H-MNTR.

     Please advise. Thank you.


Aruba Employee

Re: [IAP-205H] Can't get IP Address via E0/PT port

If you want to use the E0/PT port, then you need to jump the E0 to PT port on the rear of the AP. The mounting kit includes a short jumper for this.



Search Airheads
Showing results for 
Search instead for 
Did you mean: