Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP 304 only one external antena

This thread has been viewed 0 times

  • 1.  IAP 304 only one external antena

    Posted Jul 31, 2018 08:44 AM

    Hello AirHead members,

     

    We recently replaced our old APs by new IAP 304, despite there are three antenas connectors our reseller advise us to purchase and connect only one antena (AP-ANT-19) per IAP because our bandwith requirement and client density doesn't require more.

    Is there something to change in the IAP setup to disable not used antena connector ? could we let it not connected ?

    Is this configuration correct ?

     

    Thanks in advance

     

    Olivier



  • 2.  RE: IAP 304 only one external antena
    Best Answer

    EMPLOYEE
    Posted Jul 31, 2018 10:20 AM

    You would need to install RP-SMA terminators on the unused antenna ports of the IAP-304 for proper operation.

     

    Was the AP-ANT-19 deployed with the original APs that the 304s replaced?



  • 3.  RE: IAP 304 only one external antena

    Posted Jul 31, 2018 10:26 AM

    Antena have been purchased for IAP 304.

    Thanks for your help.

     

    Olivier