Wireless Access

Reply
Frequent Contributor II

IAP105 and IAP315 IDS settings

Hi,

 

we have a customer that has a cluster of IAP-105's Now they decided to buy new IAPs to cover an extra zone. They bought IAP305.

Now there is no firmware available in 6.5 for IAP-105 apparently. So they need to create a seperate cluster for the new IAPs.

Offcourse with their IDS settings both clusters are seeing eachother as rogue and this is giving our customer some issues.

Is there a possibility to whitelist eachother in IDS?

 

Kind regards,

Thomas

Thomas
ACMX#370 ACCX#1000 ACDX#1071 AMFX#74

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.

Re: IAP105 and IAP315 IDS settings

You should be able to mark the other system's APs on each as 'valid' or 'known interferer'

Jerrod Howard
Sr. Technical Marketing Engineer
Frequent Contributor II

Re: IAP105 and IAP315 IDS settings

I tried on my LAB IAP, but couldn't find the possibility; but I will look into it again.

 

Tnx!

Thomas
ACMX#370 ACCX#1000 ACDX#1071 AMFX#74

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
MVP

Re: IAP105 and IAP315 IDS settings

check http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-manually-re-classify-a-monitored-AP-in-Instant/ta-p/260755

 

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Frequent Contributor II

Re: IAP105 and IAP315 IDS settings

tnx koen, exactly what I was looking for!

Thomas
ACMX#370 ACCX#1000 ACDX#1071 AMFX#74

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: