Wireless Access

Reply
Frequent Contributor II

IAP275

Can I use only poe injector (802.3af) ? for supply power to IAP (on datasheet, maximum power consumption is 23 watt)

or use 2 ethernet port 10/100/1000base T. for supply power to ap (each port power budget is 15.4 watt)

Thank you
Guru Elite

Re: IAP275

No.  Please see the installation guide here:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=17323

 

Only a single 802.3at power source or AC is required:

 

Screenshot 2016-06-27 at 08.48.19.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos

Re: IAP275

Note as well that the AP-27x family will ONLY accept POE on ENET0 interface. ENET1 will not receive POE.

Jerrod Howard
Sr. Technical Marketing Engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: