Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

If configuring 2 controllers as master /local, so all configuration done on master ?

This thread has been viewed 0 times

  • 1.  If configuring 2 controllers as master /local, so all configuration done on master ?

    Posted Jun 07, 2016 09:11 AM

    Hi , if 2 controllers are configured as master and local, so all configuration should be done on master? Then AP provisioning should be do on local controller, is it correct?  Please advise, thanks in advance.



  • 2.  RE: If configuring 2 controllers as master /local, so all configuration done on master ?

    EMPLOYEE
    Posted Jun 07, 2016 09:12 AM
    Both configuration and provisioning can be done from the master.


  • 3.  RE: If configuring 2 controllers as master /local, so all configuration done on master ?

    Posted Jun 07, 2016 10:02 AM

    Thanks for reply. 

    So just need to set local controller ip as LMS/controller IP on AP provisioning , right? 



  • 4.  RE: If configuring 2 controllers as master /local, so all configuration done on master ?

    Posted Jun 12, 2016 02:00 PM

    you would do that in the AP system profile. that determines on which controller the AP ends up.