Wireless Access

Reply
Occasional Contributor II

Implement STP in Aruba Controller

Hi Guys,

Actually we have 2 Aruba Controllers (3200 XM) AOS 6.3.1.8 and we need implement STP to connect 2 ports from the controller to the SW Core Cisco (6513).

What is the best way to implement STP?

Thanks in advanced.

 

Regards,

 

Blanca Nieto

Guru Elite

Re: Implement STP in Aruba Controller

Is this for redundancy (different Cisco switches) or to aggregate throughput  (same Cisco switch)?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: Implement STP in Aruba Controller

Yes, is for redundancy, and we have 2 differents Cisco switches..

 

Thanks in advanced....

Guru Elite

Re: Implement STP in Aruba Controller

So it all depends on what kind of spanning tree you are deploying.  I searched for pvst+ in the knowledgebase and this is the first article:  http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-I-configure-PVST/ta-p/179474

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: