Wireless Access

Reply
Highlighted
Occasional Contributor II

Implementing Master/Redundancy

I have a 3400 and 3200 controller, can I implement redundancy between the two, even though they are of different models?


Accepted Solutions
Highlighted
Contributor I

Re: Implementing Master/Redundancy

Yes but you need to be aware of the AP capacity.

If you have more than 32 APs on the 3400 and it failed and all APs were directed at the 3200, only the first 32 would come up.

View solution in original post


All Replies
Highlighted
Contributor I

Re: Implementing Master/Redundancy

Yes but you need to be aware of the AP capacity.

If you have more than 32 APs on the 3400 and it failed and all APs were directed at the 3200, only the first 32 would come up.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: