Wireless Access

Reply
Highlighted
Occasional Contributor I

Importing Config from different IAP Model

I am new new Aruba IAP deployments, my question is basically pretty simple.  A customer of ours has deployed IAP 205 in many of their offices nationwide.  They have a new deployement but this time going with a IAP 305.   My plan was to just download the config from one of the 205's and import it into the 305 as the wifi settings are the same per location.   My question is if I can import configs between differerent models?    Thank you thank you


Accepted Solutions
Highlighted
Guru Elite

Re: Importing Config from different IAP Model

Typically, yes, but you need to make sure that the new AP is on the same major version of code as the one that you are importing from.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: Importing Config from different IAP Model

Typically, yes, but you need to make sure that the new AP is on the same major version of code as the one that you are importing from.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: