Hi everyone.
I just get my aruba controller 620 and two iap 105. i did some research and reading on how to configure both devices so that it will appear in controller console, but no luck.
my setup
controller 620 connected to network 172.16.28.0/24
two of my iap 105 connected in the same network which is 172.16.28.0/24
DHCP given from my dhcp server in the same network as well.
Is there any step that i missed? if there is easy 101 initial setu guide, can someone point me to the right direction lol.
please let me know if you need any other information
Thanks in advance:smileyhappy: