Wireless Access

Upcoming community maintenance Oct. 27th through Oct. 29th
For more info click here
Reply
Highlighted
Contributor I

Integration with NPS issues

Following the attached aruba document to integrate controller with NPS for 802.1x authentication, In the NPS iam getting an error

"The connection request did not match any configured network policy."  In the NPS log Authentication Type:EAP is shown.

Once it was able to authenticate properly and at that point the Authentication Type:PEAP was shown in the logs.

 

I am wondering why sometimes auth type EAP and Sometimes PEAP is coming.I beleive if I get PEAP as the auth type "connection request will match the configured network policy" and the authentication will happen.

 

I am attaching the NPS log and the screen shots from NPS configuration.Can any one help me to point out the error or point out some good document on PEAP with aruba.

 

 

Highlighted

Re: Integration with NPS issues

The error is not abou the network policy

Its telling you that he cannot find a connection request policy that match

What is the  configuration on the connection request policy? can you show me?

You should have a on that rule a condition that says NAS port type wireless

 

Cheers

Carlos

----------------------------------------------------
Project engineer
Highlighted

Re: Integration with NPS issues

im attaching you a really simple guide also

Just pay attention to the end... which is the actual  radius configuration....

i mean, If you already got the certificate installed on the server

 

If you do not have the certificate then you need  a internal CA or a external CA like verisign and buy a certificate from them.

 

Cheers

Carlos

----------------------------------------------------
Project engineer
Highlighted
Guru Elite

Re: Integration with NPS issues


@wifiabcd wrote:

Following the attached aruba document to integrate controller with NPS for 802.1x authentication, In the NPS iam getting an error

"The connection request did not match any configured network policy."  In the NPS log Authentication Type:EAP is shown.

Once it was able to authenticate properly and at that point the Authentication Type:PEAP was shown in the logs.

 

I am wondering why sometimes auth type EAP and Sometimes PEAP is coming.I beleive if I get PEAP as the auth type "connection request will match the configured network policy" and the authentication will happen.

 

I am attaching the NPS log and the screen shots from NPS configuration.Can any one help me to point out the error or point out some good document on PEAP with aruba.

 

 


Only put in one group to check.  Do not check multiple Windows Groups.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide