Wireless Access

Guru Elite

Re: Interface errors

@Javin.Craig wrote:

Yeah, just easier to troubleshoot missconfigurations remotely than it is physical. Thanks.  Will report my findings after changing out physical interfaces.



Is there a VLAN on the switch side of the trunk that is not configured on the Controller side of the trunk, or is it even a trunk?


Try matching VLANs on both sides and see if it remedies the issue.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba VIA ASE Solution - Configure VIA VPN
New Contributor

Re: Interface errors

Clear the interface counter and start with changing the fiber patch between the 2 switches. If that does not help then replace the GBICs and see what happens.

Search Airheads
Showing results for 
Search instead for 
Did you mean: