10-22-2015 09:28 AM
On my Master Controller, I have a few logs being sent to a logging server. I have set the Master to send User & Security Logs. I need to do this for all Local Controllers as well and we have 55 of them. Is there a way to push the same logging settings from the MC to all of the LCs, or do I have to do this on each one by one?
Solved! Go to Solution.
10-22-2015 10:07 AM
Re: Is it possible to push logging settings from the Master Controller to all Local Controllers?
10-22-2015 04:10 PM
You can use the on_controllers directive on the shell of the Airwave server to push it to all of the controllers. I did the command below on the shell to push the config "logging 192.168.1.25" to my three controllers. You should do it with an harmless command first, to make sure it is working properly.
[root@localhost mercury]# on_controllers "config t logging 192.168.1.25" (192.168.1.3) #config t logging 192.168.1.25 (192.168.1.27) #config t logging 192.168.1.25 (192.168.1.32) #config t logging 192.168.1.25 [root@localhost mercury]#
(Aruba7640-US) #show logging server Remote Server: 192.168.1.25 FACILITY MAPPING TABLE ---------------------- local-facility severity remote-facility -------------- -------- --------------- All All local1
All controllers will need to have the correct username/password and enable password in Airwave. Do not use if you are managing Instant APs with Airwave, because it will attempt to login to them and run the command.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars