Wireless Access

Reply
Highlighted
Occasional Contributor II

Is there an easy way to find out if an AP have been placed on VisualRF in Airwave?

Hi,

Do we have a way to get an output of all the APs on airwave and see if they are placed on a map in VisualRF? I have 10 servers with 3k APs each and want to do an inventory and check which APs are not placed in VisualRF, the manual process by going to each floor plan are long. So, I want to see if there is a better way to do it.

Highlighted
Guru Elite

Re: Is there an easy way to find out if an AP have been placed on VisualRF in Airwave?

In the AP list in Airwave, there is a location column.  Everything without a location is not on the map.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted

Re: Is there an easy way to find out if an AP have been placed on VisualRF in Airwave?

We can also check the monitor page of the AP on Airwave. If we scroll down it will show the location along with the floor plan its placed on.

 

Regards,
Vishnu
If my post helped you, don't forget to give kudos ;)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: