Wireless Access

last person joined: 23 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Is there an equivalent command `copy start run`?

This thread has been viewed 2 times

  • 1.  Is there an equivalent command `copy start run`?

    Posted Jan 21, 2019 12:59 PM

    I have some configuration that shows under `show configuration diff` that I'd like to remove. 

    Is the only way to remove this, to go and deconfigure it? Or is there an equivalent to copy the startup config to running?

    Running 6.5.4.7



  • 2.  RE: Is there an equivalent command `copy start run`?
    Best Answer

    EMPLOYEE
    Posted Jan 21, 2019 01:17 PM

    AFAIK You can only do that by setting the startup configuration and then rebooting the controller.



  • 3.  RE: Is there an equivalent command `copy start run`?

    Posted Jan 21, 2019 02:48 PM

    Bummer. Was hoping to not have to reboot. So looks like just deconfiguring is the best bet. 


    Any idea if 8.x code has a method to revert to startup without a reboot?



  • 4.  RE: Is there an equivalent command `copy start run`?

    EMPLOYEE
    Posted Jan 21, 2019 03:34 PM

    I do not.

     

    Others may chime in if they know of a way to do what you want.