Wireless Access

Reply
Highlighted

It is possible to terminate a rap in a local controller and how?

It is possible? 

If its how you configure it?

I have always configured this to point it to the master controller.

In this case i got a master in one country and a local controller on another country.

The client wants to terminate their remote APS on their local controller.

 

Thanks 

 

----------------------------------------------------
Project engineer

Accepted Solutions
Highlighted
Guru Elite

Re: It is possible to terminate a rap in a local controller and how?

That is all you need to do.  Make sure that there is no lms-ip in the AP system profile for that ap-group.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: It is possible to terminate a rap in a local controller and how?

You have to create a 1:1 nat from a public  address to the private address of the local controller.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted

Re: It is possible to terminate a rap in a local controller and how?

looks like the same to me(at least that part)

I mean i do that for the master controller when i configure it(the one on one Nat from public)

 

But what about the vpn services? is that config local to the controller? or i configure that on the master controller?, you know i have to configure the address pool for those raps

And what about the whitelist of the raps? do i just configure them on the master controller? does it share that list with the local controller ?  or i have to configure that  list on the local controller itselft

----------------------------------------------------
Project engineer
Highlighted
Guru Elite

Re: It is possible to terminate a rap in a local controller and how?

The pool is local to the controller.  The whitelist is stored on the master by default.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted

Re: It is possible to terminate a rap in a local controller and how?

So basically is the same?

 

1-You configure the pool on the Local controller under the VPN services

2-You configure the whitelist on the master

3-we create the 1on1 nat to the controller ip adddress

4-Create a group for that rap

5-Assign the Virtual AP of the corporate SSID that we already have on the corportate to that RAP group

6-Provision the RAP pointing it to the public ip address that we are assigning it on the 1on1  nat .

 

i am missing something?

 

We just want the SSID of the corporate on the remote site.

 

 

----------------------------------------------------
Project engineer
Highlighted
Guru Elite

Re: It is possible to terminate a rap in a local controller and how?

That is all you need to do.  Make sure that there is no lms-ip in the AP system profile for that ap-group.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Highlighted

Re: It is possible to terminate a rap in a local controller and how?

Thanks!!!!

----------------------------------------------------
Project engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: