Wireless Access

It is possible? 

If its how you configure it?

I have always configured this to point it to the master controller.

In this case i got a master in one country and a local controller on another country.

The client wants to terminate their remote APS on their local controller.

Thanks 

You have to create a 1:1 nat from a public  address to the private address of the local controller.

looks like the same to me(at least that part)

I mean i do that for the master controller when i configure it(the one on one Nat from public)

But what about the vpn services? is that config local to the controller? or i configure that on the master controller?, you know i have to configure the address pool for those raps

And what about the whitelist of the raps? do i just configure them on the master controller? does it share that list with the local controller ?  or i have to configure that  list on the local controller itselft

The pool is local to the controller.  The whitelist is stored on the master by default.

So basically is the same?

1-You configure the pool on the Local controller under the VPN services

2-You configure the whitelist on the master

3-we create the 1on1 nat to the controller ip adddress

4-Create a group for that rap

5-Assign the Virtual AP of the corporate SSID that we already have on the corportate to that RAP group

6-Provision the RAP pointing it to the public ip address that we are assigning it on the 1on1  nat .

i am missing something?

We just want the SSID of the corporate on the remote site.

That is all you need to do.  Make sure that there is no lms-ip in the AP system profile for that ap-group.

Thanks!!!!