Wireless Access

last person joined: 23 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

L3 controller with Local Captive Portal

This thread has been viewed 8 times

  • 1.  L3 controller with Local Captive Portal

    Posted Apr 25, 2017 10:37 PM

    I have a controller configured for Layer3 in that it will host the L2/L3 for several networks and use a single uplink and default route to reach the rest of the network. 

     

    I am having issues with Guest Redirect if I place the VAP on one of these L3 networks. The Guest gets an IP but never gets redirected to the local Captive Portal (using the controllers captive portal).

     

    If I move the VAP to the VLAN configured for the uplink, it works fine. 

    Not sure what I am doing wrong. 

     

    Trunk interface - Only VLAN 1 allowed

     

    VLAN 1 - 10.10.10.10 (Controllers IP)

    IP ROUTE 0.0.0.0 0.0.0.0 10.10.10.1

     

    VLAN 20 - 10.20.20.20

    Operstate UP

     

    Return paths are created in the infrastructure. I can ping 10.20.20.20 with no issues. I can  even stand up DHCP in the infrastructure for VLAN 20 and it will offer an IP to the client. 

     

    VAP on VLAN 20 - Captive Portal Redirect does not work 

    CAP on VLAN 1 - Client gets redirected without issue. 

     

    Help?



  • 2.  RE: L3 controller with Local Captive Portal
    Best Answer

    EMPLOYEE


  • 3.  RE: L3 controller with Local Captive Portal

    Posted Apr 25, 2017 11:02 PM

    I did every search imaginable on the forumn and did not come across that. Thanks! It did the trick!!