Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

LACP issue in AP 225

This thread has been viewed 0 times

  • 1.  LACP issue in AP 225

    Posted Jan 23, 2015 01:17 AM

    Hi Experts ,

     

    We are facing LACP issue on AP 225. We have configrued the LACP profile in Controller . And switch side also appropriate confguraion has been done . But when we enable the portchannel in switch side the ports are going to blocking state. 

     

    In controller LACP profile , we have given LMS ip and GRE striping ip as LMS+2 ip address. Because we are using the LMS+1 ip already in the network. So using LMS+2 ip will create any issue?


    #AP225


  • 2.  RE: LACP issue in AP 225

    Posted Jan 23, 2015 05:46 AM

    Hi Friend,

     

    Please clarify whether you are trying to configure Portchannel( LACP)  between AP and the Switch or between Controller and the Switch ?

     

    Please feel free for any further help on this.



  • 3.  RE: LACP issue in AP 225

    Posted Jan 23, 2015 12:56 PM

    We are configuring LACP between AP and switch side,



  • 4.  RE: LACP issue in AP 225

    Posted Jan 24, 2015 12:21 AM
    I believe in the past the rule was the two IPs had to be even/odd numbered. IE it could be LMS+3.