Wireless Access

Occasional Contributor II

LACP issue in AP 225

Hi Experts ,


We are facing LACP issue on AP 225. We have configrued the LACP profile in Controller . And switch side also appropriate confguraion has been done . But when we enable the portchannel in switch side the ports are going to blocking state. 


In controller LACP profile , we have given LMS ip and GRE striping ip as LMS+2 ip address. Because we are using the LMS+1 ip already in the network. So using LMS+2 ip will create any issue?

Valued Contributor II

Re: LACP issue in AP 225

Hi Friend,


Please clarify whether you are trying to configure Portchannel( LACP)  between AP and the Switch or between Controller and the Switch ?


Please feel free for any further help on this.

Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Occasional Contributor II

Re: LACP issue in AP 225

We are configuring LACP between AP and switch side,

Super Contributor I

Re: LACP issue in AP 225

I believe in the past the rule was the two IPs had to be even/odd numbered. IE it could be LMS+3.
ACDX #419 | ACMP |
Search Airheads
Showing results for 
Search instead for 
Did you mean: