Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Lldp:PVID mismatchon port on AP ports

This thread has been viewed 1 times

  • 1.  Lldp:PVID mismatchon port on AP ports

    Posted Mar 07, 2014 05:01 AM

    Hi,

     

    Lldp:PVID mismatchon port on AP ports

     

    We received the following message on some of our HP switches lately:-

     

    Lldp:PVID mismatchon port A15 (vid 20) with peer device port [odd character] (vid unknown) (405)

     

    Not just one port but a few ports of the switches. The common thing is all those ports are connected to AP105.  However, not all the APs (port) generated the same error.

    Say 4 out of 10.

     

    What I noticed is if I type the command: show llpd info remote-device

    Those problem ports will show portDescr as “bond0” vs “eth1 on the one without message.

     

    I am not sure if this will affect the normal operation. According to the HP, this would  happen if two interconnected switches are connected with different port untagged.

    But .. this is an AP?

    Any way to get rid of the error?

     

    Any suggestions are appreciated.

     

    Thanks



  • 2.  RE: Lldp:PVID mismatchon port on AP ports

    EMPLOYEE
    Posted Mar 10, 2014 12:59 PM

    Are these ports configured as access ports?



  • 3.  RE: Lldp:PVID mismatchon port on AP ports

    Posted May 16, 2014 07:10 AM

    I am seeing this issue as well, does anyone know what the issue is here?