Wireless Access

Reply
Frequent Contributor I

Location Based Reporting

Hello Dears,

 

From an MC 7200, can we generate monthly reports, for Data Consumption, per group (Clusters) of AP's?

 

The idea is, customer wants to use this data for revenue management, that's by knowing how much Data (GB) was consumed by a certain region, per month - Each reagion will consist of a group of AP Clusters.

 

Is this possible directly from MC 7200; without AirWave?

 

Thanks.

Guru Elite

Re: Location Based Reporting

Unfortunately, the controller is an appliance with limited historical information.  The controller would have total traffic since an AP has been up, but there is nothing to correlate it to a specific period of time.  This is where Airwave would come in.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Frequent Contributor I

Re: Location Based Reporting

Thanks Colin.

 

But with AirWave:

> Assume Clusters (1,2,3) are in Region A.

> Clusters (4 - 10) are in Region/City B

Then, with AirWave we can have seperate monthly reporting for Region/City A, and another one for Region B?

 

The main statistics they want are Data Traffic usage per month.

 

Thanks a lot.

Guru Elite

Re: Location Based Reporting

If you separate the APs into folders, you can run a report on a "folder" in Airwave to achieve that.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: