Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

MAC authentication in Master/Local deployement

This thread has been viewed 2 times

  • 1.  MAC authentication in Master/Local deployement

    Posted Apr 10, 2014 05:51 AM

    Hi All,

     

    I got one 7210 as the master, and two 3400 as the local in remote site, the remote site APs terminate at the local controller (3400) using LMS. 

     

    I want to configure MAC authentication using the controller's internal DB, knowing that the internal DB can't be synced between master/local controllers,  so in this case,  should I add the MAC address in both 7210 and 3400' internal DB? Or should I only add the MAC address in the master (7210) controller (which implies that the authentication will only happen at master controller even the remote site APs terminate at the local controller) ?

     

     


    #3400
    #7210


  • 2.  RE: MAC authentication in Master/Local deployement

    Posted Apr 10, 2014 07:35 AM

     

    You can use this :

    aaa authentication-server internal use-local-switch