MESH Points failing to connect following upgrade to ArubaOS 184.108.40.206
03-04-2015 12:36 PM
We have updated our Aruba 3400 Mobility Controllers from 220.127.116.11 to 18.104.22.168. Whilst this has been relatively successful the only issue we are experiencing is with the MESH.
At present we have 5 MESH Portals and 5 MESH Points. All Portals are registered and communicating back to the controller, however only one out of the 5 MESH Points are connected. We can see that the Portals and Points have downloaded the correct firmware for some reason the 4 MESH Points are not connecting.
We have a TAC case raised but I was wondering if anyone had any ideas on how to resolve this issue.
Re: MESH Points failing to connect following upgrade to ArubaOS 22.214.171.124
03-04-2015 01:48 PM
Do you use Airwave to Monitor your devices? Could you see the last SNR between the portals and points on that link? If the links were borderline, sometimes they could take awhile to complete an upgrade (24 hours sometimes...).
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars