Wireless Access

Reply
Occasional Contributor I

MM Upgrade from 8.3.0.4 to 8.4.0.0 breaks login authentication

Anyone else had an issue after 8.4.0.0 upgrade getting loggged back into the MM? I'm likely going to open a TAC case on it...Can't find my local account login either sadly.

Ryan Steele
CRAA
rsteele@columbusairports.com
Guru Elite

Re: MM Upgrade from 8.3.0.4 to 8.4.0.0 breaks login authentication

Were you using a radius or TACACS server to authenticate management users before the upgrade?  If yes, do you see any hits on that server?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: MM Upgrade from 8.3.0.4 to 8.4.0.0 breaks login authentication

Yes, were are using clearpass. Yes, I see reject messages for the MMs. What would have changed oon the MM to cause this?

Ryan Steele
CRAA
rsteele@columbusairports.com
Guru Elite

Re: MM Upgrade from 8.3.0.4 to 8.4.0.0 breaks login authentication

You have the reject messages.  Please compare them to previous accept messages to see what difference there is.  It could be something specific to your situation...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Frequent Contributor I

Re: MM Upgrade from 8.3.0.4 to 8.4.0.0 breaks login authentication

Just for your info. I did update my mm from 8.3 to 8.4 couple of weeks ago. My tacacs login just works fine after the upgrade. What do you see in the clearpass accesstrack logging?
Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP - Was this post usefull, Kudos are welcome.
Frequent Contributor I

Re: MM Upgrade from 8.3.0.4 to 8.4.0.0 breaks login authentication

Just for your info. I did update my mm from 8.3 to 8.4 couple of weeks ago. My tacacs login just works fine after the upgrade. What do you see in the clearpass accesstrack logging?
Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP - Was this post usefull, Kudos are welcome.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: