Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

MM query

This thread has been viewed 1 times

  • 1.  MM query

    EMPLOYEE
    Posted Oct 09, 2018 06:34 AM

    When we say that MM hosts the LSM's like AppRF, UCC, WebCC etc. which used to be run on a controller earlier what does it really mean? We also talk about user sessions maintained on MM for features such as live upgrades. Are we sending all user sessions and data to the MM? But the tunnel terminates on the MC's as I understand. Do the MC's sync these sessions to the MM, if so then I believe it can't be real-time.

     

    Many thanks in advance.



  • 2.  RE: MM query

    Posted Oct 09, 2018 12:15 PM
    The MCs use a combination of AMON and OpenFlow to share that information with the MM


    Sent from Mail for Windows 10


  • 3.  RE: MM query

    Posted Oct 09, 2018 10:55 PM
    Don't mean to hijack, but would enabling Jumbo Frames improve performance between the controllers and Mobility Master - or is that even supported since controller communication is ipsec? We were looking at enabling Jumbo Frames for AMON messages and Airwave as we've seen a large Increase in AMON message loss with ArubaOS 8 - so was curious.