04-12-2013 10:09 AM
It appears that configuration settings are not being pushed from our master controller to the local controllers. The settings on the local controllers are "grayed out" (e.g. I cannot click add a new AAA profile on a local controller) which leads me to believe that the local controllers are looking to the master for these settings. When I do a "show switches" on the master all of the locals show status as "up" and configuration state as "UPDATE SUCCESSFUL". But when I make a new AAA profile on the master it does not show up on the locals. Should these configuration changes show up automatically on the local controllers and if not is there a command that I need to run to synch them? Thanks.
Solved! Go to Solution.
Re: Master Push to Local Controllers
04-12-2013 10:19 AM
If you click on "save configuration" or do a "write mem" on the master, those settings will be pushed. Just changing them on the master does not push the configuration.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
04-12-2013 10:27 AM
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA