Wireless Access

Occasional Contributor II

Re: Master-to-Local disconnection

we are using the 6.4 version on both 7240 and 3200 , also I need to know, should we add native clan in order to get master to local communicates with each other??!!


I've used local and master before and knows what you said, but this connection shows no stability, I think I'm going to open a case.

Guru Elite

Re: Master-to-Local disconnection


You do not need to define any native vlans. They only require IP connectivity between switch IP addresses.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
All-Decade MVP 2020

Re: Master-to-Local disconnection


Garyshtern wrote:

> What version of AOS are you running? What I've seen is with the communication between Master & Local does not work.

> Local indicates that the Master could not be contracted, even though all of ipsec sa information is working well and ICMP works

> between the two.


We've seen similar behavior between an L2-connected HA dual pair since an upgrade to, manifesting as missed HA heartbeats.  We have a TAC case in on it.