Wireless Access

Occasional Contributor II

Re: Mesh - Lan2Lan Bridge

Do you mind to share the link with me. I am unable to ping the switch,
phones and cps.
I am working with Tech but useless and waste of time
Occasional Contributor I

Re: Mesh - Lan2Lan Bridge

I am in this same scenario with 2 Cisco switches serving the x2 Mesh APs and using dot1q trunking.  Can you look at your switch interfaces and paste their configs here for me?  I too cannot get the switchport interfaces to stop STP blocking.  I keep getting this when using bridged mode while trunking the VLANs I want across it "P2P Dispute Edge"


Strangely this works in tunneled mode but can't leave the AP MESH in tunneled mode:


Vlan                Role Sts Cost      Prio.Nbr Type
------------------- ---- --- --------- -------- --------------------------------
VLAN0010            Desg BLK 4         128.15   P2p Dispute Edge
VLAN0030            Desg FWD 4         128.15   P2p Edge

Search Airheads
Showing results for 
Search instead for 
Did you mean: