Wireless Access

Reply
Highlighted
New Contributor

Mesh Link and WiFi Clients

Hi team,

I have some doubts about the mesh-link and wifi clients.

After watching this:

https://community.arubanetworks.com/t5/Video/Instant-Training-Module-7-Mesh-Wired-Access-amp-Uplink/ta-p/474963

 

I understand that I can have my mesh-link at 5Ghz and have wifi clients only at 2.4Ghz. Also, the wired ports can be used to have eth drops. Could I set the following scenario?image.png

 

Is it possible to have 2 Mesh Points (or more) connected to the same Portal? How much would this impact in the mesh-link speed?

 

Thanks!

Re: Mesh Link and WiFi Clients

Yes, you can have two points associate to a portal. The 'math' is basically load balancing the throughput between the two points.


Jerrod Howard
Distinguished Technologist, TME
New Contributor

Re: Mesh Link and WiFi Clients

Thanks for this information. It useful
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: