Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Mesh Link and WiFi Clients

This thread has been viewed 5 times

  • 1.  Mesh Link and WiFi Clients

    Posted Mar 21, 2019 01:34 PM

    Hi team,

    I have some doubts about the mesh-link and wifi clients.

    After watching this:

    https://community.arubanetworks.com/t5/Video/Instant-Training-Module-7-Mesh-Wired-Access-amp-Uplink/ta-p/474963

     

    I understand that I can have my mesh-link at 5Ghz and have wifi clients only at 2.4Ghz. Also, the wired ports can be used to have eth drops. Could I set the following scenario?image.png

     

    Is it possible to have 2 Mesh Points (or more) connected to the same Portal? How much would this impact in the mesh-link speed?

     

    Thanks!



  • 2.  RE: Mesh Link and WiFi Clients
    Best Answer

    EMPLOYEE
    Posted Mar 21, 2019 03:02 PM

    Yes, you can have two points associate to a portal. The 'math' is basically load balancing the throughput between the two points.



  • 3.  RE: Mesh Link and WiFi Clients

    Posted Oct 22, 2019 10:58 AM
    Thanks for this information. It useful