Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Mesh points dot11a radio channel reflected as 0 on dashboard!

This thread has been viewed 0 times

  • 1.  Mesh points dot11a radio channel reflected as 0 on dashboard!

    Posted Feb 28, 2017 03:30 AM
      |   view attached

    Hi,

    I am running with code 6.5.0.2 on Aruba7240XM.

    The Mesh backhaul is on 5 ghz radio. When I monitor the status of mesh points on dashboard, there are few of them against which the channel is reflected as 0, PFA. What do it signify?

     

    From the cli, could see appropriate channels against them though:

    (WLC_0002) #show ap radio-summary dot11a | include XXX1
    XXX1          AP-GRP1              274      172.25.44.142  5     MP::36       15/20         -94/55/12  6/4/5/6/5/8       24/25/24/25/26/23  2/1/1/2/1/2

    (WLC_0002) #show ap radio-summary dot11a | include XXX2
    XXX2          AP-GRP1              277      172.25.44.132  5     MP::36    15/28.5       -97/51/12  5/3/4/5/4/6       24/24/25/24/22/23  1/1/1/1/1/1

    (WLC_0002) #show ap radio-summary dot11a | include XXX3
    XXX3          AP-GRP1              277      172.25.44.222  5     MP::36    15/28.5       -97/56/10  7/9/11/13/10/14    21/20/21/18/20/18  2/2/2/2/2/2



  • 2.  RE: Mesh points dot11a radio channel reflected as 0 on dashboard!

    EMPLOYEE
    Posted Feb 28, 2017 06:33 AM

    I would upgrade to 6.5.0.4 and see if you still see the same symptoms.  Many bugs were fixed in 6.5.0.3 and 6.5.0.4.