Wireless Access

Occasional Contributor II

Missing add button for Firewall Policies



I am trying to create a test captive portal using the guide from http://community.arubanetworks.com/t5/Community-Tribal-Knowledge-Base/For-the-Beginner-Configuring-a-Guest-WLAN-with-the-Controller/ta-p/31550


Unfortunately, I cannot find add button under the firewall policies. Is this removed on version 6.1.3.x? See the attachment. I also tried another browser but it is the same. How can this be done on CLI?


Currently, I am using arubaos ver


Thanks for any information you can provide.





MVP Guru

Re: Missing add button for Firewall Policies


A couple of things:


- is this a local controller ? if it is then you need to add this from the master 

- Make sure you have a PEF license installed

- CLear your cache on your browser or try another browser

Thank you

Victor Fabian
Lead Mobility Architect @WEI
Valued Contributor I

Re: Missing add button for Firewall Policies

The screenshot you posted, doesn't have a "master" tab at the top (which therefore indicates you are on the master controller), so my guess is you don't have a PEF-NG license.


Click "configuration" at the top, then "controller" under "network" on the left. Then in the lower row of tabs toward the top of the screen click licenses. What do you see in there (they show up towards the bottom of the page).


Kudos appreciated, but I'm not hunting! (ACMX 104)

Re: Missing add button for Firewall Policies

Yes...licenses are suspect.  Can you ssh and do a show licenses?

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
If you found my post helpful, please give kudos
Occasional Contributor II

Re: Missing add button for Firewall Policies

Thanks. I'll try to check the license again. I had write erase all the controller a few weeks back and I think I have not loaded the PEF license.



Search Airheads
Showing results for 
Search instead for 
Did you mean: