Wireless Access

Reply
Highlighted
Occasional Contributor II

Missing zero touch instructions

Really technical issue here!!!

 

I can't seem to find a copy of the RAP-2WG zero touch instructions. Can anyone point me in the right direction?

 

Thanks so much

tweet @wjhphoto

Accepted Solutions
Highlighted
Moderator

Re: Missing zero touch instructions

Is this what you are looking for?

 

http://support.arubanetworks.com/DOCUMENTATION/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=2874

 

 



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post


All Replies
Highlighted
Moderator

Re: Missing zero touch instructions

Is this what you are looking for?

 

http://support.arubanetworks.com/DOCUMENTATION/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=2874

 

 



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post

Highlighted
Occasional Contributor II

Re: Missing zero touch instructions

I'm so rubbish at finding .  Cheers! 

tweet @wjhphoto
Highlighted
MVP Expert

Re: Missing zero touch instructions

answered

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Aruba Employee

Re: Missing zero touch instructions

Zero-Touch configuration using Aruba Activate and AirWave is not supported on the RAP-2 or RAP-5.  It is supported on all IAPs and the new RAPs (RAP-3, RAP-10x, RAP-155).

 

For the RAP-2 and RAP-5 either you pre-provision them or the end-user has to connect via wire and input the IP address of the controller to receive its' config.