Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Missing zero touch instructions

This thread has been viewed 2 times

  • 1.  Missing zero touch instructions

    Posted Sep 20, 2013 11:17 AM

    Really technical issue here!!!

     

    I can't seem to find a copy of the RAP-2WG zero touch instructions. Can anyone point me in the right direction?

     

    Thanks so much



  • 2.  RE: Missing zero touch instructions
    Best Answer

    EMPLOYEE
    Posted Sep 20, 2013 11:28 AM
      |   view attached

    Is this what you are looking for?

     

    http://support.arubanetworks.com/DOCUMENTATION/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=2874

     

     

    Attachment(s)

    pdf
    RAP2_InstallGuide rev_03.pdf   746 KB 1 version


  • 3.  RE: Missing zero touch instructions

    Posted Sep 20, 2013 11:40 AM

    I'm so rubbish at finding .  Cheers! 



  • 4.  RE: Missing zero touch instructions

    Posted Sep 20, 2013 07:41 PM

    Zero-Touch configuration using Aruba Activate and AirWave is not supported on the RAP-2 or RAP-5.  It is supported on all IAPs and the new RAPs (RAP-3, RAP-10x, RAP-155).

     

    For the RAP-2 and RAP-5 either you pre-provision them or the end-user has to connect via wire and input the IP address of the controller to receive its' config.


    #RAP155


  • 5.  RE: Missing zero touch instructions

    Posted Sep 20, 2013 11:40 AM

    answered