Wireless Access

Hi Aruba,

 

I recently purchased Aruba AP 515 and want to mount it on the ceiling.  I have a flat ceiling with dry wall materials.  Please advise on what mounting kit I should get with part number and where I can get it.   Appreciate your help very much.

I would recommend a AP-MNT-MP10-E. This is a flat surface mount, and can be attached to single and dual-gang electrical boxes as well. See attached mounting options for the 5xx series.

 

 

Hi Dustin,

 

That's a 10pk.  Is there singles which I can buy?

Yes there are individual type-E mounting brackets available. Check the AP-5xx ordering guide for the specific part number.

Good resource about the AP-500 serie mount options can be find here.

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=31544

 

De AP-MNT-MP10-D also does the job and have a smaller footprint then the AP-MNT-MP10-E, both are for flatsurfaces or wall mount.

 

Link to the AP-500 ordering guide here:

https://www.arubanetworks.com/assets/og/OG_AP-500Series.pdf

 

 

Thank you, mkk.

Some links need to be updated because Aruba has been promoting ASP for a while.

Aruba AP-MNT-MP10 Indoor Access Point Mount Kits v2 - Installation Guide

------------------------------
Yakup Allak
------------------------------

Original Message:
Sent: Apr 09, 2020 12:16 PM
From: marcel koedijk
Subject: Mounting for flat drywall ceiling

Good resource about the AP-500 serie mount options can be find here.

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=31544

 

De AP-MNT-MP10-D also does the job and have a smaller footprint then the AP-MNT-MP10-E, both are for flatsurfaces or wall mount.

 

Link to the AP-500 ordering guide here:

https://www.arubanetworks.com/assets/og/OG_AP-500Series.pdf

 

 

Thank you, efisher214.